I've had the DSB back on the esc tonight, checked the firmware is correct, it is. Turned boost and turbo to 0 and drag brake off, everything else is stock. All soldered joints are perfect. Checked the sensor wire is connected both ends and also checked the posts on the speed passion motor, all is fine, no movement etc. I put some fresh heat shrink over the female plugs to ensure nothing is touching the end bell. Refit the motor after checking the drivetrain, which is nice and free and made sure the meshing is good. Recalibated the esc to radio system with all end points at 100%. I then put some old wheels on an popped in some charged saddles and took it over the road in the cul de sac, ran great, nice and smooth throttle control, but 5-6mins in, flashing green led, motor and esc were warm but definatly not hot, I'm truly stumped now just don't know what do with the thing
|