Quote:
Originally Posted by Neil Skull
If you have the correct Mod software installed, then make sure all settings are set to default, and try again.
Just be aware that if you borrow a DSB and it has different firmware to your ESC it can also be a problem.
Also make sure you use a Team Orion sensor lead as there are some querks out there, the temp pin on the orion is different to some, This normally shows up when it wont communicate to the DSB.
|
Cheers Neil,
It's a brand new dsb. I updated this first, then updated to the latest mod firmware on the esc. Everything is at default in the settings. The sensor lead I'm using is the one I updated with so I'm assuming this is ok. Think I may need to change the motor (speedpassion) at least to rule it out as a/the problem