Quote:
Originally Posted by Stu Dixon
Dan,
I have printed Roger's sutup off and am going to use it only thing is I can tell what holes the ball studs are in ? Don't know if it's just me being a bit dumb ! That's why I was asking if they are run long or short etc ?
Cheers
Stu
|
Hole 3 on the front is the outer hole on the bulkhead. On the rear, Hole 3 is the second from the outside on the alloy hubs. If you have the plastic Type-B hubs, it is the outside hole. Inside hole on the rear bulkhead.