[Dkfream]

I fitted these to both my sv2 models and left the washers in but found that they had an unbelievable amount of slop and lift in the steering linkage, I experimented with different washers and in the end I removed both washers and also the same from the radius arm mounts and all the slop and lift goes away and still allows everything to move freely, the radius arms have a raised side and a flat side and I flipped them so the raised side sat upwards and when all nipped down I had a freely moving steering system with zero slop or free play, others may disagree with this setup but for me it's how it should be, all the slop just allows the front geometry to be messed up when driving