Quote:
Originally Posted by SiR_Dave
37.5 Oil up front with a 1.6 piston Blue 4wd front spring, 1mm limiter.
32.5 Oil in the rear with a 1.7 piston Blue 2/4wd rear spring, 1mm limiter.
20mm front ride height
20mm rear ride height
Kit setting on the rear hub and shock tower
One shock hole in on the front tower from the kit setting and .5mm shim under the shock tower ball stud.
Gear diff with 2000w oil
This should be a pretty good starting point  |
Thanks SiR_Dave, your help is much appreciated.
What about the basic settings such as toe & camber?
Note i'm running a xm converted 201 rather than the xmw but I guess the 2 cars are similar enough that your setup will be a good starting point for the old car too?