[Chrislong]

Lesro currently doesn't have stock, I know that Footey wants one too.

Daryl said he'll be getting them in with his next order from USA, not sure when though.

But don't fret, as the plastic one is adequate until the alloy ones are back in the UK again.

What to do... of the two screws going through it from under the chassis, replace the one on the outside of the motor plate with a longer screw and put a lock nut on it, one of those gold mini-nuts from Losi is ideal for the job. Then the other screw which threads into the plastic, just tighten it to pinch tight.

With the new 4 gear, you can put a screw from behind the plate through the brace and a nut on it (another gold one), this is strong. With the 3 gear, where it taps into the plate, use thread lock.

Chris