[Muzzie]

Guys,

I'm on a mission to figure out what is the best setup for the TM2 at Mansfield. After our outdoor outing on Sunday I can't believe there are load of us running TM2's all with different setups. Could you post your Mansfield setup?

Here's mine

Front

25 deg castor block
long link on the front camber link
Middle hole on the shock tower
outer hole on the wish bone
kit med springs
37.5 WT shock oil - kit piston, 2 holes drilled to 1.4mm
-0.5 camber
-0.5 toe out
Brass hop up
Front link on the Ackerman bar


Rear

Med link on rear camber inside hole
inside hole on the hub
Middle hole on shock tower
outer hole on the wish bone
kit med springs
-1.5 camer
30 WT shock oil - pistion 2 holes drilled to 1.4mm
5000wt diff oil

22t pinion
RW spur

7.5 motor

Side rails off