Quote:
Originally Posted by SiR_Dave
If you were able to find a set of TRF511 upgrade chassis set diffs they would drop in no problem... but the standard TRF511 (37T) will not work.. since the 39T gear has to be matched up with different diff plates ( TRF417 ones )... and those diff plates will not work with the standard TRF511 outdrives... you will need to get all of the parts I listed before by part # 
It sucks looking for them because most of the parts are special order  |
ahh I understand now
Or I suppose I can hope 37t trf511 diffs can fit, without any clearance issues with it being a smaller diff, as long as the pulley lines up with the belt, and the outdrive bearings line up to the bulkheads.
Quote:
Originally Posted by SiR_Dave
Might be worth a try... but the outdrives might be short by about 2mm per side.. when I was looking at some of the replacement gear diff out drives I looked at the TA-06 ones.. while they would work.. they are a little short.. I can posy up a pic if you would like to see the difference between them  |
edit.....no it's ok. I can't imagine how to 'make' up the 2mm difference per side to make it fit the bulkheads