Quote:
Originally Posted by ReneT
Ok, did some measurements. Bmax2 MR, stock wheel arms, 3 degrees toe on suspension mounts and another 0.5 degrees on hub carriers. Measured on wheels without tires at it's widest point.
Stock white pin wheels. Width = 23.95mm
Stock spacer and 4.3 12mm front hex:
Bmax4-iii yellow 12mm wheels, asso 12mm hex wheels (9696) and pro-line (2736-02) velocity all measure 24.25mm total width.
|
Thanks for that. so you keep the kit B2-011S blue spacer, then use a BMAX4iii B4-011F 4.3 hex.
What about the difference in offset between the regular BMAX4iii 12mm hex rear wheels and the AE/Proline 12mm hex rear wheels? Surely its a bit wider again with AE/Prolines?
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2
-------------------------------------------------------------------------------------------------------------------
10electric |
Batley Buggy Club |
YORCC |
RHR |
MB Models
---------------------------------------------------------------------------------------------------------------