I use 1/8 stock car doughnuts made by contact. Usually I buy from kamtec but Bolton model Mart and Ross mod carry them sometimes. I use 40 up front and 35 rear. Loads of different methods to mount them, I just cut all ribs off my wheels and stretch the tyre over. I glue with normal tyre glue, some use contact adhesive but you'll need to rough up all of the rim for this to stick to the wheel. The fronts on my 4wd I cut the rims to 2wd width. Most people then true them one way or another but I'm lazy and just throw the car on and they soon bed in. You'll also need additive this is usually available to buy at race control
|