Quote:
Originally Posted by SiR_Dave
Now with the 511 body that you have fitted to the 503... how much room does the body have around the bump for the motor now that motor has been moved forward 7mm on the 503.. Just wondeing since I would really like to use my 501x bodies  |
Because the chassis is longer, i can actually move the body forward or backward ~7mm maybe. But still, there's a little room above the motor even if the bump is not at the exact spot. I had trouble fitting my wiring on 501 earlier. Now that there's more room in the back of the spur, its quite handy to put the motor wires under the antenna holder.
The motor is also moved inward. So there's more room about 8mm in that direction. The sensor wire doesn't rub against the body anymore.
If the servo arm rubs against the body, i can reverse the servo with a shorter arm. (in the manual a short servo was fitted other way around and standard was fitted like i did)
Btw, did you try b44 phantom with 511 undertray?