Quote:
Originally Posted by Neil Skull
Hi Lee,
UM521-1 is all you need the RB5 wishbones. you will need 2 as its a set!
many drivers use this set up on high grip.
|
Doesn't UM521-1 only have the one mounting hole for the shocks? I have UM566 which has two holes on both sides of the arm. Again you need to order x2.
You will also need to either ream out the ends to fit the stock outer hinge pin or use these...
http://insidelineracing.co.uk/new-pr...51ca4c-details
You'll need 2 small button head screws same as the ones that hold the pins in the front wishbones, not sure on the size or part number for these though.