Quote:
Originally Posted by RalfM
Would the kamtec shell for the zx-s (LA-122) fit on the lazer ZX-R?
Regards
Ralf
|
Kamtec sells the shell with the undertray so is worth the price.
Yes but its a tight fit, you'll need to buy the associated B4 servo side mounts and use the 1mm spacer to push the servo further inwards on your chassis to get it to fit the under tray. Also would advise not cutting the end off until you have held it against the chassis as the end is shorter on the zxs compared to the ZXR so you may not need to cut off as much.
Be advised that you will need to be patient cutting it out as there are no lines to follow but is worth doing as its a quality product. Have a set of small sharp curved scissors handy as it will be needed.