[sosidge]

Originally Posted by Chris Harte

I have set my Orion Advantage charger (the first edition) to:

Set to Nimh batteries
4500MAh capacity with a charge rate of 5amps.

I would switch off the capacity cut.

3mv Per Cell
6 cell pack.
Cut off temp 35 degree celcius.

This is too low, 40-45 degrees would be better.

I press charge and it says check battery.

I have discharged my cells to 0.9volts on a novak smart tray and the deans are on the right way. Why isn't it picking them up

What is the resting voltage across the whole pack?

My cells are a pack of these: http://demonpowerproducts.co.uk/prod...oducts_id=1882

When I load up the battery management screen it says input 12.5v which is correct but the output says 14.2V.

This seems weird. Possibly a hardware fault.

Any ideas what is going wrong?