[Northy]

Originally Posted by fidspeed

think I read on here somewhere you can flash hobbywing software onto the 120 amp jobbies so I would think so

I have a s/h one and programme card on its way ill let you know looking forward to having a play

regards dave

fidspeed, have you had chance to play with this yet?

Originally Posted by andys

G.

The one I got - the Turnigy 120amp flashes when you initially connect it up and calibrate it.
When I connected the setup box all the boost etc was at 0. Once I altered this to something other than 0 - it stopped flashing - so I assume it's in 'blink mode' as it 'blinks' when all the turbo stuff is set to 0

This one Andy?
http://www.hobbyking.com/hobbyking/s...arehouse_.html

What setup box did you use? Is there any way to alter timing?

Originally Posted by i4n

I know that the 120A "xcar" range they do takes the Hobbywing 2.1 firmware as I've flashed the latest stock onto the one I've got in my hauler as a spare ESC. I guess as it takes that it'll take the blinky one as well.

This one?
http://www.hobbyking.com/hobbyking/s...nsorless_.html


Thanks,

G