So Aluminum hinge pin holders for the GTB.
These are the Mk 1 prototypes so have just had a quick De-bur and sanded back rather than a full surface finish (polish or anodising not sure which yet). Also the holes for removing the inserts were hand drilled as an after thought. On the final product they would be cnc machined and nice and central.
Rear pair first - These provide rear toe adjustment from -1.5 degrees to -3.5 degrees and anti squat adjustment +-1 degree from stock antisquat (As per mini 8 settings sheet). Also due to not needing to be so deep we are able to provide wheel base adjustment by +-1.6mm from stock (but hopefully with some design adjustments we can get this to +-2mm from stock). Which out of interest is still BRCA legal.
Next the front hanger - this is only for the front and doesn't contain inserts. This is more for strength really (I've bent the standard in a crash) but we could have separate options available with different kick up/caster angles. We don't expect to do the rear hanger for the front at the moment but this may change
