Hi,
about 1 year ago I bought a strange Yokomo Chassis:
- the chassis was from the Works 91
- The front & rear gearbox and the shock were from the Hotdog
- Additionally the steering and front suspension reinformcement was from the Works 93
I was missing mainly the front shock stay and the rear shocks to bring the whole thing at least back to life = drive.
The I stumbled across a Works 93 10 days ago and could not resist. It is in overall good condition, only problems are:
- On one rear shock the piston shaft was bent; I replaced it with a Kyosho part
- And the rear diff and the rear belt were heavily used.
In the meanwhile I found some rear shocks for the Works-mixture-project. They were in awful condition but I could bring them at least to no-leaking-life.
Now I am still searching for:
- rear diff gear ZC-503 with 35 teeth
- one rear belt ZC-656
- One front shock stay ZC-710S
At the same time I have quite some parts that I do not need:
- A new body for the old Yokomo "Superdogfighter": the rear body post hole was changed to an "open slot" and a fine breakage is also there; however it has still the protection tape on
- Numerous battery posts
- 2 steerings for the Superdogfighter or Works 91
- Several wing mounts
- 2 used wide yellow rims for I think YZ 10
I also realized that the Works-mixture seems to have an aftermarket-shocktower:
It has 8 holes for the mounting of the rear shock. If anyone is particularly interested in this part- no problem.
It would be great if anybody could give me a hint where to source the rear belt and the rear diff gear (35 teeth).
Thanks everyone and have a nice Sunday
Ralf