Thanks SiR_Dave.
It seems to be easy to mod but see what discostu say:
Quote:
Originally Posted by discostu
its not as simple as it sounds you need to dremel the inner rib of the gear boxes and the drive shafts have way too much slop theteam c diff outdrives use 2.5mm dog bone pins and tamiya uses 2.0mm you also need to hone the inner of the out drive to get full up travel with tamiya drive shafts.
you can fit team c drive shafts but you would need the hex pins and the wheels to fit.
stu
|
The Team C gear diffs cost: 60€ (in Europe)