Quote:
Originally Posted by sosidge
Just in case anyone is interested I have just taken a couple of measurements from the Durga shocks (total length).
The fronts are approximately 77mm extended, 60mm compressed.
The rears are approximately 93mm extended, 65mm compressed.
|
Quote:
Originally Posted by Spoolio
If anybody is interested in using them, my mate has built up his B44 shocks and the dimensions are as follows (measured from the top of the alloy Factory Team cap eyelet to the bottom of the shock rod eyelet):
Front compressed / extended = 63mm / 83mm
Rear compressed / extended = 72mm / 98mm
Not sure how these compare with B4 shocks though (sorry can't be arsed to take mine off to measure them at the moment), heck I haven't even checked the part numbers. For all I know B4 and B44 shocks might be the same parts.
|
Any chance you could re-take the measurements from mounting centre to mounting centre? I think the B44 shocks are the same size bodies as the B4 so compressed will be the same but the B44 has longer front shafts for more extension.
For the kit Tamiya shocks you subtract 7mm from the total length to get the centre-centre length.