I'd take out the additional under lipo weight.
I find the kit blue xl springs work well. I keep going back to them. They are quite stiff. I found a softer spring makes the car want to collapse at the rear.
I've tried a bunch of pistons and some don't offer enough pack. the kit piston is a bit light on pack, as is AE 1.7. I'm now using AE 1.6 piston front and rear, with 500cst front and 400cst rear oils.
what's your ride height? noticed lots of setup sheets had low 17-18mm ride heights, but found that was far too low for any tracks with jumps. iron about 22mm rear ride height, and a touch lower in front
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2
-------------------------------------------------------------------------------------------------------------------
10electric | Batley Buggy Club | YORCC | RHR | MB Models
--------------------------------------------------------------------------------------------------------------- |