You would have a job putting a 550 motor in a 2wd sc truck as most 550's have a 5mm shaft and pinions in most 2wd's are 48dp and nearly everyone of them has the 1/8-3.12mm shaft hole.plus you don't need the extra torque a 550 motor has,the 540 is all you need,I've run 3 seasons of sc nationals with the same old 10.5 and a 8.5 at Coventry dirt as you run out of speed down their main straight..unless your running a desc410 without the front driveshafts in I wouldn't bother..
__________________
Mugen mbx6eco....
Mardave Cobra TQ.....IconicRc edition
PB Mini Mustang......Been in the shed edition
and 65 other pre 1998 iconic rc cars....
Nosram Novak Orion lrp Reedy Turnigy Futaba Schumacher proline
ACTIVE SCALE MODELS.CO.UK........better than some other model shop's ive been too...
|