View Single Post
  #4  
Old 26-01-2014
Pulse's Avatar
Pulse Pulse is offline
Member
 
Join Date: Jan 2011
Location: Brussels, Belgium
Posts: 146
Default

Quote:
Originally Posted by mattr View Post
Mine arrives later this week, just wondering if there are any hints, tips or things I should be aware of while I build and drive it.......
Planning to put the toro 150a and one of the hk 4 pole motors (1900kv) as a starter.

Then chop/change/upgrade as the mood takes me.
I got one, just make sure you shim the diffs correctly (allow a minimum play) and glue the upper plastic part of the servo saver on its axle (you can degrease the area with alcohol before you do so). Put some glue around exposed CF parts also to protect them. Loctite screws that go in metal parts and use good/new tools.

No upgrade needed excepted a M2C front shock tower brace and why not DE Racing skidplates and mudgards.

The build was very easy in my case, the quality of the buggy is very high and the manual must be the most detailed on the market.

If you need some help for the wiring let me know I can always do a few pics

I forgot to talk about the body: there is none in the box so you'll need to buy a Jconcepts finisher for xb9, it's the best fit with plenty of room for your lipos

have fun
__________________
wanted: 1/8 and 1/12 setup stations

THE eCAR 2WD l MP9 TKI3 l S350 Evo l MP9E TKI l MBX6 Eco USA l 12R5.2 l SP12X l EMB-1H
Reply With Quote