Quote:
Originally Posted by ben
Here's the conversion i've been doing. I'm short on the Durango input shafts at the moment so if you send me those i can put them together. |
The bearings on the diff are from the B4.1 and the ones on the pinion shaft are the ones that come in the B44.2 kit. Ben's kit comes with the bearings you need. No modifications are needed, simply drop into the diff housings and shim them (You need to use the shims that come with the diffs as AE's won't fit over Durango outdrives, I shimmed it the same way my ball diff was and checked it after the first run). HTH