Quote:
Originally Posted by Alex Johns
If you release your front shocks from the wishbones have u checked if your wishbones move freely?
sometimes over tightening the grub screws which hold the hinge pin in place can make the wishbones move stiffly and limit the shock movement.
|
ive taken the grub screws out of the pivot block and snugged them back in but still alot of droop
wishbones are not stiff and free to moved
ive got 3mm limiters in the shocks too
shocks shafts are fine and not bent
im really stumped as to why the collars are all the way down just to get 19mm ride height
with the collars half way.....im getting about 8mm ride height