Yes, "all is in" the car. "ready to race". (OK, I could add a few more stickers...)
Even the transponder is in..
How do I measure the hight?
- the car is on the set-up board
- i compress and release it several times
- and then I have a gauge for the hight (5-22mm)
- the measuring point is in the front an in the back "right in the middle" and/or left and right and the rear and front directly behind the wishbones.
I build the shocks with 50% rebound.
The only thing i can imagine is, that the shocks are too long. But the ball studs are build with the "distance" displayed in the manual....
Other ideas? Using pin hole high in the rear?
|