Yeh I've done the same, plastic Durango hex's from the 210, all I did different was shave the small boss off the inside and turned up an aluminium spacer recreating the boss on the bearing side of that, gap was 2.6mm without boss on hex, to fit Durango fronts I found bearing spacing was slightly wider than Yok wheels simply turned a .4mm step on some counter washers to make the extra room saved altering the axle if I ever want to go back.
__________________
----Cougar 2 team----Cougar 2 works----Cougar 2000---- ----Schumacher Bosscat---- ----Traxxas TRX1----Losi XXX CR----Losi XXX BK2---- ----AE B4 ft----Xfactory X6^----DEX210 V1---- ----TLR22 3.0----TLR22 4.0----TLR22t 4.0----TLR22 5.0AC---- ----AE B6.4----
|