Quote:
Originally Posted by wylie
Hi, I'm thinking of taking the plunge after 3 1/2 years of Durango, Just got a couple of questions
What hop ups are required? (if any) understand there maybe hinge pin issues, but should be resolved.
Do Losi rims fit?
Heard there are some crosshead screws not all hexes, what size so they can be replaced during build.
Any other info or build tips!!
Thanks.
|
No hot ups required just buy the smaller front hexes so you can run Associated and JConcepts wheels that's it.
I used to run a Durango and the Yokomo pisses all over it . The Durango was stressful to keep it together over a 5min run and it would bite your head off if you pushed too hard it was a quick car if you kept it together. The Yokomo has loads of steering and the balance is amazing. I can push the BMax and it loves it.
If you get one don't use the setup out of the book, put no1 pistons in the rear shocks. Put the piston in the front flat side up, ball stud on the inner hole on the front hub and steering links forward. DO NOT use the additional weight between the cells . The book set up isn't suited to Uk tracks and I found the car lacking steering and turn in. Now I've changed it the car is perfect.
If you're worried about hinge pins the XB4 ones fit.