Quote:
Originally Posted by Lplate
Hi,
Regarding the MaxAmp 4400mah/5500mah Lipo Saddle Packs...
Does anyone have pictures on how you strap the lipos in?
I'm thinking I may need to build a battery tray for it.
|
I have the 4400 in my 501X and I have taken some thin xtra body lexan and built small trays to hold the battery in the chassis. I had a problem with the battery wanting to slide out of the body (after a crash or 2) but I just bent a small 1/4" lip and used double sided tape to hold it in place. No need for anything put the thinest you can find. Not paper thin. Also I have the wires from the saddle packs on the outside of the straps to keep the pack from sliding in and hitting the belt. And I used the thick (2mm) and medium (1mm) spacer under each battery post to allow the strap to fit the taller saddle pack and lexan tray.
Hope this make since and helps.
Great Racing