Quote:
Originally Posted by maineyak
Checked through my tranny settings and my EPA for brakes was set at 103% Is that going to make much difference? Reset to 100% anyway.
Can I just run this by you again?
If I want to set the initial brake to 0% the instructions say set it for zero flashes. Seems there are never zero flashes it only ever starts at one.
However the instructions say there is a maximum of 10 flashes per category but I count 11 flashes as max for Auto and initial brake categories. I assume 11 flashes = 0% then?
Initial brake is how aggressive the brake force is I guess. If I set it to 0 should I have no brakes?
|
EPA to 100% will help slightly, but your other settings are your problem
If you look at the chart in the manual there are 11 settings per mode, since 0 is the first then there are ten more (hence 11), by setting to 11 flashes you are on 100% brake as soon as you pull back on the stick, try 2 or 3 to start with (standard) which will be 10 or 20% initial then progressively working up to 100% through the stick downward travel.
Menu 0 should not be confused with 0 flashes.
The less flashes, the less initial brake you will have....
Hope that helps