Quote:
Originally Posted by Jonny5
Durango has a -2mm LRC hanger available for the Type B chassis sets. I machined an original TD RR hanger to accept the new Type B motor guard quite a while ago when I received a few of the proto Type B chassis. Very helpful mod to gain rear bite and give the back end a more stable feel.
|
I saw that, and good to hear it helps
However, Durango doesn't seem to offer RF hangers that can give 0 degrees of anti squat combined with the RR hanger... and I don't have any machining equipment to do an accurate job myself to make a -2mm plastic or metal RF hanger. So are you running 3 deg at all times, or have you found another way to get 0 deg. anti-squat with the LRC RR hanger?
Edit: With minor dremeling, one could also put the original RR hanger upside down, which puts the mounting point 2.5mm lower on the rear - which only leaves the RF hanger to be lowered (For a 2mm lower mount, one could do a bit of dremeling on it and shim the block upward from under the hanger). I've got an idea for a 3D printed RF hanger that might work with this to achieve proper anti-squat adjustability.