Quote:
Originally Posted by Danny Harrison
looking at that, I'd say, lower the torque timing right down. drop to minimum on initial drive and dont run any boost to start. Try setting an exponential curve on transmitter too. I run between 25-45% depending on the track. Curve should slop upwards. It varies on transmitters as to whether its - or + expo to achieve it.
If your really set on a motor change, I think the reedy motors are known to put power down soft and smoothly.
|
Ok, I will lower the torque timing down, I didn't run and boost. I will check my transmitter, (dx3r pro).
Just been reading up on x12 timing inserts, I have standard at the moment, I can go to +5 or +10 for higher rpm or -5, -10??
thanks