Quote:
Originally Posted by Randy p
First thing to inspect is to assure your A B C wires are in the correct order.
Next up is to verify the motor is working properly. IF the esc is showing all led's and flashing it's giving full power to the motor, whether or not the motor is good isn't something the esc can verify.
Do you have another motor to test with?
|
Thanks for the reply Randy. Yes all motor wires are correct and I've tried the motor in my 4wd just now with the hobbywing and its fine.
I just out it back in with the Tekin and turned the throttle profile to C2 and put the boost to Maximum to see what would happen. Wow. It's gone ballistic, just how it should be. It seems adjusting the boost makes a massive difference and I had it set low previously causing hardly any speed so it seems turning it up increases the power, obviously. I've been playing with the timing advance but it seems to have little or no effect on the power/speed.
What settings would you recommend I have for the timing advance, boost,turbo, turbo ramp/delay?