Help im broken
Where do I start lol
This is the 3rd time I have stripped and re built my steering unit on the 410v3 as I can not get stop it drifting to a side.. I have spoken to a couple of guys about it online they are baffled too no body runs them around here so I hope you guys can help
I have just bought every nut.bolt.part (the servo mount and steering arm are now aluminium ) the servo saver is tresrey and all over conponents are new to including the servo.i built it as instructions everything is nice and free and checked with nothing connected all free and nothing rubbing . Put on aluminium servo arm and checked and that's centering put it all together and still a few about 2cm out after back and forth so tightened the servo saver up a full turn and was a bit better so I took it for a try out side and ....
It was awful tracking was out and corrected it and turned and the other way would be way way off I have no idea what to do I won't give up as thats part the fun right trying to make things better and run well
Any advice is seriously appreciated as im at a loss right now
Thanks
|