Quote:
Originally Posted by neallewis
No, 100 is full current limit, so maximum limit on the current, lowest punch effect. Set it to 0 (no flashes) for current limit off. Try it...
Setting 50% is least amount of current limit, and 100% is most limit.
Manual: http://www.sven-rudig.com/downloads/...SR1-Manual.pdf |
I read it as how much current you get, if you set at 100% then there would be no current supplied and no movement! Plus a speedo that will not give you more than at 50% current...?
In my interpretation, 50% gives you 50% current, 100% gives you max current.
When I've set current down to 50% I've found the response a little softer but YMMV.