Quote:
Originally Posted by Frecklychimp
turn on receiver with plug in, wait until it flashes then pull bind plug out
then hold bind button on tx and turn it on, wait till it flashes then let go of button and let it bind
turn both off and then turn on, problem should be sorted and you can calibrate speedo... make sure you set throttle/brake epa to maximum with LRP speedo's.
let us know how you get on  |
Tried it no joy. Checked my KO and i always have throttle and brake set to 100 instead of 150. Changed to 150 but still the exact same.
Quote:
Originally Posted by Zipper
When you bind the transmitter & receiver, hold the brake on your transmitter. This means that when the failsafe kicks in, your speedo will go into full brake.
|
Tried this, still the same.
Quote:
Originally Posted by paul whittock
Hey allan I have the same problem when I fitted my new ko kiy running with a track And field speedo . I guess it's a radio issue of some sort , doesn't really bother me I just make sure I turn the car on second and of 1st .
|
After trying the above stuff, i'm going to put this down to a disagreement between my Flow and Spektrum as there was no issue with the SXX TC.
It's not the worst problem ever, just irritating.