Quote:
Originally Posted by Frecklychimp
List your binding procedure
you are using the plug?
I've had this with every new LRP used with a Spektrum module... all you have to do is reset the failsafe but can't understand how you are getting it wrong?!
|
My Spektrum was 2nd hand, no manual so i was told the setup procedure, unsure if correct, here is my way as above.
Everything off, bind plug into slot marked B on receiver, turn car on and light flashes rapidly.
Turn transmitter on with bind button held in, let go off button when it's flashing rapidly, it sits for a couple of seconds then binds.
I've tried turning car off first, then transmitter. I've tried other way round.
I've also tried while binding, holding the bind button pressed on the transmitter until it binds to car.
I had no issue like this with my LRP SXX TC and Spektrum.