[Allan1875]

Hi guys, wondering if anyone has experienced this problem or has any suggestions?

I recently changed from my KO module in my Espirit III to a SPektrum module. Initially couldn't get the fail safe to work right when binding the receiver, everytime i switched the car on the wheels would spin up almost on full throttle. I solved this by binding the receiver without my transponder plugged in.

Anyway, i thought that was all fine but i have just changed from an LRP SXX TC to an LRP Flow and have encountered a similar problem.

When i first turn the car on the wheels spin for about 1.5 seconds, however it's only like a 5% throttle so they spin very slowly. If you turn the car off straight after and turn it back on they don't spin up the 2nd time. Also if you turn the tranny and car on and ocne the wheels have spun up, if you turn the transmitter off, the car stays still, so the fail safe appears to be working correctly.

Can anybody figure out why the wheels are spinning up?

All the usual things i've checked, trim at neutral when binding etc, have tried rebinding several times. The only thing that has changed is my speedo.

Would appreciate any answers.