on my x4te ( same car ) I ran
front and rear top decks cut,
geard diffs 7000 front 5000 rear ( with 4 planetry gears )
kit pistons drilled to 1.4 each hole
450 / 500 cst front
350 / 400 cst rear
losi blue / black front springs
kit rear springs
middle hole rear shock tower
inner hole on wishbone
shocks swaped to front ( mote pivot in corners )
inner hole rear toplink
inner hole on 1deg Durango hubs with hobao h2 wheels ( widens rear track )
inner hole front shock tower
outer hole on wishbone
inner hole on top link
2mm spacer on outer ball joint using 13deg hubs
65gram weight between lipos ( where plastic spacer should be )
remove casing round spur gear to reduce heat
alloy chassis depending on track
|