Throttle Range Setting/Calibration
A) Ensure the ESC is
switched off. Turn on
the transmitter.
B) Set the direction of
throttle channel
to”REV” (ONLY for
Futaba Radios), set
the “EPA/ATV” value
of throttle channel to
“100%”.
C) Use a pen or
screwdriver to press
and hold the “Setup”
button on the ESC.
Release the “Setup”
button when the red
LED begins to flash.
D) Set the 3 points
according to the steps
shown in the picture to
the left
a) Neutral point
b) Full throttle
c) Full brake
E) When the calibration
process is completed,
The ESC will
automatically turn off
|