Quote:
Originally Posted by Gavin Collingwood
Stock build is 1.5 degree, if you lift the back you get less anti squat as the arms are flatter
|
spoke to roger mills gav
no shims is 2 degree
1mm shimm between wishbone hanger and bumper takes away 1 degree making the car 1 degree
1mm shim under the front whishbone hanger is plus 1 degree making it 3 degree
No shims = ?2 degree
.5mm = under the rear1.5 degree
.5mm under the front = 2.5 degree
there is a shimm between the hanger and the bulkhead this has nothing to do with anti squat its to take up the gap between gearbox and hanger if u add a shimm under the hanger u remove the same from on top