Little list of my own...
First order:
Hobbyking SK450 Glass Fiber Quadcopter Frame 450mm
Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation (Red)
10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation (Green)
D2830-11 1000kv Brushless Motor x4
Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller x4
Turnigy TY-P1 25Amp Brushless ESC Programming Card
Turnigy 9X 9Ch Transmitter without Module (Mode 2) (v2 Firmware)
FrSky DF 2.4Ghz Combo Pack for JR w/ Module & RX
5.6mm x 21mm M3 Nylon Threaded Spacer (10pc)
M3X10 Nylon Screws (10pcs/bag)
M3 Nylon Nut (10pcs/bag)
PolyMax 3.5mm Gold Connectors 10 PAIRS (20PC)
Hobbyking SK450 Replacement Arm Set - Red (2pcs/bag)
10CM Male to Male Servo Lead (JR) 26AWG (10pcs/set)
Turnigy 2450mAh 3S 30C Lipo Pack
XT60 Male w/ 12AWG Silicon Wire 10cm (5pcs/bag)
Hobby King Quadcopter Power Distribution Board
Turnigy 4mm Heat Shrink Tube - RED (1mtr)
Extra Size Cardboard Box and Packing 183g
Second order:
Atmel Atmega Socket Firmware Flashing Tool
USBasp AVR Programming Device for ATMEL proccessors
Third order:
D2830-11 1000kv Brushless Motor x3
Battery Velcro Strap (2pcs/bag)
Forth order:
Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller x4
(blew a coupe - problem now solved)
Fifth order:
Turnigy 3000mAh 3S 40C Lipo Pack (UK Warehouse) x2
(now it fly's, I need to fly more!)
Sixth order:
HXT 4mm to XT-60 Battery Adapter (2pcs/bag) (UK Warehouse)
(to make fifth order battery's fit)
Seventh order:
10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation (Red)
10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation (Green)
(current ones are a bit battered - you wouldn't believe the damage caused by flying through flys!)
Eighth order:
Turnigy Battery Strap 330mm
Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
So far, that's the lot.
I've oredered a spare KK2 for one reason - they no longer make the single axis giro that the board uses. One way or another this means the end of the KK2. Rumour has is a KK3 is on the way
Last edited by Col; 11-06-2013 at 07:13 PM.
|