[rosey1990]

Yokomo BD7, comes boxed with spares/upgrade parts and manual. A Protoform LW LTCR (used for one meeting) and MazdaSpeed 6 bodyshell are included, as well as nearly new Corally STCC tyres.

The BD7 is in excellent condition having barely been used since I purchased it during October 2012; I have used it in 5 rounds of the EWS (on carpet) and 2 outdoor events. The chassis has some marks on the underside as a result of being used outdoors. The car has been maintained to the highest standard with the gear diff seals, damper bladders and O-rings, and spool outdrives recently being replaced for new items. The car comes fitted with the floating servo mount, Titanium coated shock shafts, and the double O-ring damper seal. The front driveshafts fitted on the car in the picture have never been used, as I used the double joint driveshafts (also included).




The follwing spares/upgrades are included (all pictured):

• BD-010FW – x2 pairs Front Double Joint Universal Shaft. 1 new driveshaft, 2 nearly new, 1 damaged (parts may be salvageable)
• BD-500GS – Gear Differential Unit (BNIP output shafts included. The case has been slightly modified to fit a TC6, but will still fit the BD7 perfectly with the included bearing shims)
• B7-30113 – BD7 Aluminium split suspension mount (41.3mm)
• BD-301FF3 – Aluminium Front Suspension Mount 4.2 (nearly new)
• BD-301RR2 – Aluminium Rear Suspension Mount 5.7 (used once)
• BD-008FG – Graphite Front Suspension Arm (used once)
  
• BD-008R1 – Graphite Rear Suspension Arm (Damper Pivot 39.5mm) - used once
  
• BD-415RG – Graphite Rear Hub Carrier (used once)
  
• BD-415SG – Graphite Front Steering Block (BNIP)
  
• BD-415S – Front Steering Block (BNIP)
  
• B7-413 - Front Hub Carrier (4 degree caster) - One has light scoring where a driveshaft pin came undone.
  
• BD-413 – Front hub carrier (4 degree caster) (BNIP)
  
• B7-204 – BD7 Servo Horn/sway bar holder/antenna mount (BNIP)
  
• Panaracer 112T Spur gear 64dp (BNIP)
  
• Panaracer 116T Spur gear 64dp (BNIP)
  
• BD-009A – Outer Suspension Arm Pin (BNIP)
  
• BD-009BF – Front Inner Suspension Arm Pin (BNIP)
  
• BD-009BR – Rear Inner Suspension Arm (BNIP)
  
• BD-500DPW – Aluminium Differential White Joint Protector (BNIP)
  
• BD-516L – Front Drive Belt (BNIP)
  
• YS-7HG – High Grade O-Ring (BNIP)
  
• B7-207 – Ball Joints (BNIP)
  
• x4 Drive Hexes
  

I'm looking for £475 posted for everything. I'm selling this car due to acquiring sponsorship.