Hi
All links are in kit position (will detail later), kit oil in shocks (20wt?), kits pisotons, kit springs, shocks in outer position on wishbone F&B, inner hole on shock mount @ back, middle @ front. I'm running Schumacher mini pins and low profile cut staggers in yellow compund. Electrics wise I've a 5.6 stick lipo and 7.5 turn Orca with Orca spark esc. I've 70g wheel weights on the servo.
In terms of handling:
The front goes light on acceleration - I've loosened the slipper which helps but should I add more weight, how much?
The font end seems soft/under damped on jumps
It grip rolls fairly easily - the sping adjusters and shock ends are wound right down at the rear so can't adjust the ride height further but the car still rides higher than most at the rear
Under/over steer isn't really an issue, or not until I cure the grip roll!
thanks for the advice
Richard
|