Quote:
Originally Posted by timmy
Thanks again both, so much knowledge, i think i know where i'm going with the build for now. I've got a 10.5 fusion exceed combo i can take out of a short course and drop in the buggy (don't suppose theres a gearng chart with ratio's etc.. hidden deep in these pages anywhere?), I'll order the front shock tower from fibre-lyte tomorrow. Welshy - do you have a part no. for the ZX steering plate?
I've noted both your comments on the pro's and cons of the different steering plates and the front hubs. Best thing for me to do is to get the car running and do some back to back comparisons and see what suits me best.
Body - i'm presuming TBG is the place to go? Could only find a ZXS body & undertray on Kamtec, or would that fit the car?
|
Front mount and brace 1 on the lazer zx section under kyosho on fibre lyte website. That mount i never managed to break and means its strong. Also get a kyosho part number and may be a bit pricey but part number is 39655 as its the blue steering that we all used in 90's. This means no spacing and will stop the bump steer.
Zxs body cones with an undertray and does fit but you may need to buy a B4 servo arms (the things that hold the servo to the chassis) as that gives you the option of pushing it further inwards on the chassis. Otherwise buy the tomcat shell from kamtec and several undertrays from tbg or whoever makes them but they dont last long whereas the kamtec shells and undertray do and are a much better product.
There is a chart in the last 40 pages or so in the zxr thread. I did it so if i didnt post it the ratios are either .6 or wrong. I tend to base my startup ratios from the novak web site and work from there.