[QUOTE=kartstuffer;772483]Hi tony
Bring it with you on Saturday and I will run through it all with you,have you a Hotwire.
I found before with another esc that it was the radio not set at zero trims etc that can stop the esc arming.?[/QUOTE]
yes.... I had to set it back to zero for it to pick up / arm
Quote:
Originally Posted by Mr Satchell
Just got a new rx8. Was wondering if the 3 screws in the box go in the bottom of the esc. Also what's the best way to mount it
|
I use double sided tape to mount mine
Quote:
Originally Posted by jayropes
Hi peeps,
My rx8 has started doing some strange things. All of a sudden during a race it lost all power and started cogging. I took the sensor lead out and still the same. I changed the sensor lead.... Still the same. I changed motors...... Still the same. I re-saved the settings again and again and....... Still the same!!
There was one difference after re-saving the settings - the fault code displaying on the speedo is wrong motor type???
This speedo has been ultra reliable for the past year or so, without skipping a beat, so seems strange to just pack up on me now!!
Any help gratefully received!!
Jay
|
have you been playing with end point on the radio? if so, rebind with everything at max then setup your esc... I hope this makes sense