Hi guys
Yes the Durango weights kit fit this chassis
Thanks origneelreclameboard it says it on post #1
The very rear under weight is as per normal 410
And the rear side weights fit upside down above the rear brace. There are extra holes through chassis and rear mounting blocks, with screws provided, you can clamp the side weights down to make the rear brace more rigid or mount them on O rings ( not supplied ) to allow flex
Also you can remove one screw in each of the carbon side/ mounting blocks to tune flex ( where the flex occurs and how much) as long as both front and rear blocks have a screw in to hold the car together , but in any configuration to achieve the flex you prefer
Hope this makes sense
It maybe easier to explain with pics
I will post some pics in the morning , when I get back from racing.
Thanks
|