Quote:
Originally Posted by Ritchie T
Adding a 0.3mm spacer on the front axles takes out a lot of play
|
Hi,
Thanks for the tip but its not play in the wheel to axel fit, its the linkage arm underneath the bulkhead with the bearings in it. It just has more movement/play than the SV.
As I said it doesn't seem to make any difference to lap times. I've run an SV around a track then changed the shocks & the wheels over to an SV2 and ran around the same track 10minutes after running the SV and my lap times were the same and probably a bit more consistent with the SV2.
That was before I did a few 'tweaks' to the SV2, now I'm a little bit quicker with the SV2
