Hi Fid
My end points are set at 120% left and 90% right, which is just about perfect for me.
I think that Nic And's tip is mainly to get the correct length of the arm that comes from the servo. Certainly worth trying.
What you need to aim for (although I apologise if this is obvious) is for the two ball joints at the chassis end of the steering rods to be as central as possible, so the steering rods are the same length. To get this spot on my servo horn is slightly left of central, just seems to work better.
Also double check that it is missing the chassis when you turn left. Mine just misses but I know that another H2 at my club has that problem.
Mr S
|