Here's how I've run my car for some time now, mainly round maritime which is multi-surface so would recommend as a good starting point.
Front:
Shocks:
Vega Protoshocks - (1.4 2 Hole 2 Slot - 32.5wt Losi - Vega Blue Spring) - Currently using
AE V2's (AE No.2 Piston - 35wt Losi - AE Blue) - Was on car previously
Shock Position: Middle on tower, Outer on wishbone
Camber Link: Inside on tower, 3mm under stud, Middle on caster block, 30 Deg Blocks.
2mm under the bump steer washer position
Standard Bulkhead
Rear:
Vega Protoshocks - (1.4 2 Hole 2 Slot - 30wt Losi - Vega Blue Spring) - Currently using
AE V2's (AE No.1 Piston - 30wt Losi - AE Silver) - Was on car previously
Shock Position: Middle on tower, Outer on wishbone
Camber Link: Top hole on middle row on tower, 3rd hole out on 0 degree alloy hubs with top part marked A. (Hubs reversed to straighten link)
Medium Wheelbase
2 degree's antisquat
3 degree's toe in
Motor: HPI 7.5
Speedo: HPI Flux Pro
Gearing: 26/78
Cells in centerline config, 60 odd grams under them aswell.
Gearing for a 6.5 I'd say 24/25 on a 78 spur. Hope that helps!
__________________
Will Johnson
|