Quote:
Originally Posted by RichieZXR
Hey folks, I am after some advice for my old 410R, I have recently upgraded my motor to a speed passion V3 5.5, I need to know what is the best pinion to run ? I am currently on an 87t spur and a 22t pinion, but was told by a few of the lads that I was grossly over geared ? We run indoors on a mixture of carpet and polished floor (about 50/50 mix) also lots of jumps and twistys.
Anyone able to advise before I go buy some pinions ?
Cheers
Richie
|
Technically all motors are different so should take notice of the manufacturers recommended gearing.......!!!
The recommended gear ratio for a speed passion V3 5.5R motor is between 8.8 - 10.5 !!!
Page 33 in the manual gives you the gear ratio's using an 87t spur gear with pinion gears ranging from 16t - 30t !!!
In case you wanna know how to work it out........!!!
spur / pinion x internal = final drive ratio
87 / 22 x 2.47 = 9.76
So according to speed passion you are Technically within there recommended gearing
